Warehouse stairs

New Warehouse Steps

Rust is another name for iron oxide. The process of oxidation occurs when a metal reacts with oxygen in the presence of water or moisture in the air. Given enough time and exposure to oxygen and water, any iron mass will convert to rust and disintegrate. The life of the product can be prolonged by galvanizing the metal which provides a protective layer of metallic zinc. However, galvanization often fails at seams, holes, and joints where there are gaps in the coatings. Therefore, galvanization provides protection for only a limited period of time. The chipped paint is most likely due to age, which is unavoidable.

As time goes on, the cohesive bond strength continues to develop. Cohesion, in laymen’s terms, means that the paint particles are sticking to each other better and better over time. Therefore, the cohesive bond strength can overwhelm the adhesive strength of the coating to the metal. The steps are no longer compliant with OSHA regulations since the concrete and metal have created uneven step treads along with large “lumps” in the tread nosing.

ADA-compliance is typically necessary for loading dock steps because non-affiliated delivery workers may use the steps to drop off small loads. Since the stairs are used by non-employees, ADA regulations must be followed.

Upside Innovations makes every product from aluminum because of its weather-resistant properties and high tensile strength. More benefits of aluminum are: Aluminum oxidizes when exposed to oxygen and moisture, but the result is not rust. Oxidation on aluminum actually strengthens the material instead of deteriorating it. This means that over time, aluminum becomes stronger.

The powder coating is typically applied electrostatically and then cured under heat. This makes the coating form a “skin” that is much less likely to experience the cohesion and chipping that paint experiences.

For a loading dock application, ADA-compliant warehouse steps are usually required. All of Upside’s loading dock steps are compliant with the latest ADA regulation. If ADA is not required for the application, the OSHA-compliant step is available.

Elevated walkway stairs

Aluminum Generator Access Platform

CTA for Expert quote from Upside Innovations

Call (513) 889-2492

A generator access platform and the steps are important for providing safe, compliant access to the employees who provide maintenance to generators. Platforms and steps typically comply with walking-working surfaces and OSHA regulations for fixed stairways which means that there are several regulations for tread depth, tread width, riser height, platform size, guardrail height, and more.

Rendering of an APEX generator access stairs

A generator access platform requires a guardrail system if the platform is more than 4′ above the ground or lower level. Still, for optimal safety, many employers choose a guardrail system regardless of the platform height. The guardrail system consists of top rails and midrails (or some other intermediate object between the top rail and platform). The top edge of the top rails must be between 39″ and 45″ above the walking surface, while the midrail must be installed at the midpoint between the walking surface and the top edge of the top rail.

Generator Platform OSHA-Compliant Dimensions

Typical OSHA-compliant dimensions for generator steps:

  • 6.5″ riser height
  • 11″ tread depth
  • 38″ tread width
  • 38″ clearance between handrails
  • 36″ handrail height

Read the OSHA regulations for fixed stairways to view all generator access step regulations.

Upside Innovations worked on a project involving two generators that required OSHA-compliant access consisting of platforms and steps. The end-user wanted the two generators to be connected by the platform so that maintenance personnel wouldn’t have to go up and down each generator’s set of steps. Upside designed a custom solution so that employees could access both generators via a continuous platform.

OSHA-compliant access consisting of platforms and steps
OSHA-compliant access consisting of platforms and steps

Our Services

Our team designs, manufactures, ships, and installs ADA & IBC-compliant stairs, ramps, and canopies to fit YOUR custom project. Our experts will work with you throughout the project to ensure your installation is correct to your specifications and code-compliant.

Design Version 2Next serviceManufacture V2 GraphicNext serviceShip Icon V2Next serviceInstall Version 2
Membership Affiliations: